Short version: High-power electronics generate both EMI and heat, and the two problems usually occupy the same physical space. Traditional approaches treat them separately: a thermal pad for heat, an absorber for EMI. The 3PB Solutions DU Series combines both functions in a single material, providing RF absorption from 2 to 18 GHz while also
Short version: The single most important factor in choosing an RF absorber is the frequency you need to absorb. Every absorber material is optimized for a specific frequency range, and using the wrong one wastes time and money. This guide provides a straightforward frequency-to-product mapping for the full 3PB Solutions line from 0.5 GHz to
Short version: If you are building, upgrading, or repairing an anechoic chamber, the absorber material determines the chamber's performance envelope. Pyramidal foam, ferrite tile, hybrid absorbers, and flat reticulated foam each serve different roles depending on frequency range, chamber geometry, and test application. 3PB Solutions manufactures reticulated foam and broadband lossy foam for chamber
Short version: Automotive radar sensors at 24 GHz and 77 GHz are standard equipment on most new vehicles, from adaptive cruise control to blind-spot detection to automated emergency braking. The sensor housings are small, the frequencies are high, and the absorber materials inside need to be thin and precisely tuned. 3PB Solutions manufactures elastomer
